Paper Title:
Processing and Characterization of AlCu Aluminium Alloys by the ECAE Method
  Abstract

Equal channel angular extrusion method (ECAE) was used to deform AlCu alloys in the range of true strains ε = 1.15 – 2.3. Samples for investigation were produced from extruded bars, conventionally manufactured and from a consolidated powder ingot. The influence of the strain on the structure was studied by using light microscopy and TEM and on properties by hardness measurement. Increased strain caused structural refinement of structure and increased hardness. The structure revealed the presence of the mutually crossing microbands, visible against the background of a high density of dislocations. After annealing, nearly equiaxed grains were formed. The material prepared by powder consolidation possessed greater hardness. The results revealed differences in structure and properties of nominally the same alloy, but processed differently, when subjected to deformation by ECAE

  Info
Periodical
Solid State Phenomena (Volume 114)
Edited by
Witold Lojkowski and John R. Blizzard
Pages
165-170
DOI
10.4028/www.scientific.net/SSP.114.165
Citation
M. Lech-Grega, S. Boczkal, J. Senderski, B. Płonka, "Processing and Characterization of AlCu Aluminium Alloys by the ECAE Method", Solid State Phenomena, Vol. 114, pp. 165-170, 2006
Online since
July 2006
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Chang Liang Li, Hua Ding, Yong Qing Zhao, Lian Zhou
Abstract:Superplastic forming provides a good way for Ti alloys which are usually difficult to be deformed. Ti75 alloy with a nominal composition of...
2969
Authors: Zhi Min Zhang, Qiang Wang, B.C. Li, X. Zhang
Abstract:Warm compression tests of AZ31 Mg alloy were carried out at five temperatures in 30°C intervals from 210°C to 330°C. The samples of...
1813
Authors: M. Kolář, Vladivoj Očenášek, J. Uhlíř, Ivana Stulíková, Bohumil Smola, Martin Vlach, V. Neubert, K. Šperlink
Abstract:The influence of plastic deformation and heat-treatment on the precipitation of Al3(Sc, Zr) particles and the effect of these precipitates...
357
Authors: Xiao Ping Luo, Lan Ting Xia, Ming Gang Zhang
Abstract:The effect of Cd and Sb addition on the microstructural and mechanical properties of as-cast AZ31 alloys was investigated and compared. The...
197
Authors: N.I. Vlasova, V.S. Gaviko, A.G. Popov, N.N. Shchegoleva, L.A. Stashkova, Dmitriy Gunderov, Xavier Sauvage
Abstract:Equiatomic FePd alloy in the ordered state has been processed by means of high-pressure torsion deformation (HPTD) and then annealed. X-ray...
392