Paper Title:
Sawing Characteristics of a Diamond Circular Blade with Grits in Ordered Distribution
  Abstract

The sawing characteristics of a diamond circular blade with grits set in ordered distribution were investigated in comparison with a conventional blade on which grits are of random distribution. The two blades were tested under the same sawing conditions. Forces and power were monitored during sawing. The results indicate that the changing tendency of sawing forces and power versus sawing parameters are basically same for the two blades. However, the setting of grits in ordered distribution leads to lower sawing forces as well as force ratio, and can reduce nearly one third energy consumption.

  Info
Periodical
Solid State Phenomena (Volume 175)
Edited by
Xipeng Xu
Pages
161-165
DOI
10.4028/www.scientific.net/SSP.175.161
Citation
G. Q. Huang, X. Xu, "Sawing Characteristics of a Diamond Circular Blade with Grits in Ordered Distribution", Solid State Phenomena, Vol. 175, pp. 161-165, 2011
Online since
June 2011
Export
Price
$32.00
Share

In order to see related information, you need to Login.

In order to see related information, you need to Login.

Authors: Ying Ning Hu, Cheng Yong Wang, H.N. Ding, Z.W. Wang
Abstract:The wear mechanism of several kinds of diamond circular saw blades was studied in the different sawing parameters during dry cutting of...
315
Authors: Xin Wei, Rui Wei Huang, Shao Hui Lai, Z.H. Xie
Abstract:ID (inner-diameter) slicing is widely used in cutting ingots currently. In this paper, the deflection (axial vibration) and vibration...
641
Authors: Shan Shan Hu, Ying Ning Hu, Cheng Yong Wang, Chang Xiong Chen
Abstract:Finite element mode analysis and structure optimization of several multitude holes structure diamond saw blades are conducted to study...
78
Authors: Jin Hui Liu, Guang Bin Bu, C. Zhao, Dun Wen Zuo, M. Wang
Abstract:The cutting force in manufacture process was observed with Kistler dynamometer. A special clamp was designed to simulate the real condition...
40
Authors: Wei Wei Liu, Pei Chen, Xiao Juan Gao, Chen Wei Shan, Min Wan
High-Speed/Precision Machining and Inspection Technology
Abstract:In this paper, a new procedure is proposed to study the deformation errors for spiral milling process of blade, which can be simplified as a...
1773