Papers by Author: Adrián Rodríguez

Abstract: An accurate prediction of the dynamic stability of a cutting system involves the implementation of tool geometry and cutting conditions on any model used for such purpose. This study presents a dynamic cutting force model based on the collocation method by Chebyshev polynomials taking advantage from its ability to consider tool geometry and cutting parameters. In the paper, a simple 1DOF model is used to forecast chatter vibrations due to the workpiece and tool, which are distinguished in separate sections. The proposed model is verified positively against experimental dynamic tests.

Abstract: Time to market is a critical measurement for todays foundry market. Combining 3D digitizing and sand blocks milling is possible to reduce this time. Avoiding the use of a wood pattern, this technique is useful for art pieces or unique parts, when only one component is necessary. The key of the proposed methodology is to achieve enough tool life with conventional tool qualities, avoiding the risk of sand destruction or damage. A special study of tool wear is presented in this work, studying different tool materials and different sand types. Two examples of unique parts are also presented in this work following the proposed methodology in order to reduce time and cost for the rapid reproduction of very short batches.

Abstract: In this paper the ball burnishing as a finishing process for sculptured surfaces is studied. This technique is a quick, easy and economical process for a significant improvement of high-end parts. Aiming at the burnishing of complex parts, different strategies are possible. In this case two strategies are presented: continuous burnishing (CB) using 5-axis interpolation and patch burnishing (PB) using 3+2 axis interpolation. Two parts have been previously machined in five-axis and then finished using ball burnishing techniques. The first one is an AISI 1045 hemisphere and the second one is a DIN 1.2379 part (64 HRC). Surface quality has been evaluated for both strategies obtaining a significant improvement of surface roughness and hardness.