Papers by Author: Ali Badidi Bouda

Abstract: A mechanical or thermal treatment of a material can change, among other things, the average grains size. It depends on temperature, holding time, cooling condition or rolling stress. The average grain size, as well as its influence on the propagation velocity and attenuation coefficient of ultrasonic waves, also affects the wave frequency propagating through the material. Grain size is an indicator of material fatigue. It can therefore be used in monitoring or fatigue damage prevention. In this paper, we study the effect of various heat treatments hence different steel average grain sizes on the ultrasonic wave frequency after crossing the material. We have performed the same experimental study on aluminum samples. The different grain sizes are obtained by rolling. The frequency shift measurement of longitudinal waves is achieved by immersion with two probes of different frequencies 2.25 and 5 MHz. The experimental results are shown as curves giving the frequencies depending on the grain size. Heat treatments on steel and aluminum rolling performed on the samples have yielded a grain sizes gradient. Our results are consistent with the theory because of the important path in the sample and in this case the down shift frequency is paramount. They show a direct relationship between the frequency shift and the average grain size. It is therefore possible to trace quantitatively to an average grains size from the frequency of an ultrasonic wave that has passed through this material and hence its thermal or mechanical fatigue state.

Abstract: When measuring the ultrasound field, the signal provided by the receiving transducer is affected by its spatial properties. Particularly, the displacement normal to its surface is spatially averaged because of the receiver finite size. In this study, we show using a numerical simulation, the effectiveness of the spatial deconvolution of these effects for a rectangular transducer. For that, three methods allowing the inversion of the aperture effect are tested 1) Wiener’s method; 2) the power spectral equalization (PSE) method, and 3) the maximum a posteriori (MAP) method. The obtained results show that the three methods are able to reconstruct the ultrasound field from the spatially averaged values and the quality of the reconstruction depends strongly upon the signal to noise ratio (SNR) and the spatial frequencies of the ultrasound field investigated

Abstract: Sandwich plates, made of two aluminum layers and a metal honey comb core are used in the aircraft industry. The purpose of this study is to show the ultrasonic guided waves sensibility to discover delamination in skin-honeycomb sandwich structures used in aeronautics. Separation between the skin and the core can appear during the manufacture or after use. In this work, Lamb's waves are used to control this kind of plane structure. Indeed, these waves have the advantage to put in vibration the totality of the plate that we want to control and they propagate on long distances without too much attenuation. The revealing, by the guided waves, of the unsticking which can meet on such sandwiches, between the plate and the honeycomb core is studied and commented.