Papers by Author: Atsumichi Kushibe

Abstract: As a new damping material, the authors first developed a Zn-22wt.%-Al eutectoid alloy with ultra-fine grains exhibiting superplasticity at room temperature by means of thermomechanical controlling processes (TMCPs). The Zn-Al alloy has a few advantages such as low work-hardening rate and high ductility over a conventional seismic damping material, for instance, a low-yield-point steel. In addition, Zn-Al alloys are environment-conscious because of no harmful metal like Pb. However, when Zn-Al alloys are subjected to plastic deformation, since its work hardening is small, plastic deformation proceeds locally so that required absorption energy cannot be sufficiently obtained, and local fracture and local deformation instability can take place easily, which is the intrinsic characteristic of superplastic materials. Therefore we attempted to develop a shear panel type, a brace type damper for tall buildings and a bending type damper for Japanese wooden houses using FEM analysis in order to minimize localized strain and local deformation and to determine the optimum shape for this Zn-Al superplastic seismic damper. As a result, an ecological and high-energy absorption seismic dampers, so-called “maintenance-free seismic damper,” was successfully developed.

Abstract: The damping behavior of an Fe-28Mn-6Si-5Cr-0.5NbC (mass%) shape memory alloy was measured by low cycle fatigue tests during tension-compression loadings. A remarkable damping capacity was observed above the strain amplitude of 0.1%, and the specific damping capacity (SDC) parameter reached saturation at ~ 80% above 0.4%. The reversible motion of the γ/ε interfaces is considered to dominate the cyclic deformation behavior, while the work hardening during tension-compression loading is negligible. These characteristics are favorable for seismic damping devices that protect civil structures from earthquakes.

Abstract: High strain rate superplasticity has been realised at room temperature for the first time with a ultra fine grained Zn-22wt%Al alloy. Zn-Al alloys have some advantages over low-yieldpoint steels in their low work-hardening rate and high ductility. In addition, Zn-Al alloys are environment-conscious because of no harmful metal like Pb. However, when Zn-Al alloys are subjected to plastic deformation, the strain is localised and local fracture can take place because of their low work-hardening property. In this study, a seismic damper was designed with a Ultra fine grained Zn-Al alloy. As a result, an ecological and high performance seismic damper, the so-called “maintenance-free seismic damper”, has been successfully developed.