Papers by Author: Boško Grbić

Abstract: In the present work, the surface properties of various Al oxide films were investigated. The oxide films were produced on a stainless steel by spray pyrolysis and cathodic deposition methods. The films obtained represent typical layers that can be used as a support in model systems to investigate alumina-based catalysts. Information about the chemical environment of the Al and O ions in the oxide films depending on the preparation conditions has been deduced from the binding energies of the Al 2p and O 1s electron core levels and corresponding Auger parameters.

Abstract: We have investigated the deposition of ZrO2 and Al2O3 films on a stainless steel (SS) substrate by spray pyrolysis method. The ZrO2 films were deposited from aqueous solution of zirconium dinitrate oxide. For Al2O3 films, a boehmite sol was used. The specific surface areas of samples were determined by the BET-method and sample surfaces were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. The spray pyrolysis method permits the preparation of ZrO2 and Al2O3 thin films on SS with good adhesion. This method enables preparation of oxide layers with relatively high specific surface area, suitable for applications as catalysts supports.

Abstract: In this paper the adsorption and oxidation of CO on nanocrystalline Au/γ-Fe2O3, Au/α- Fe2O3, γ-Fe2O3 and a series of mixed ferrite with MnxZn1-xFe2O4 composition are investigated. The catalysts were prepared by co-precipitation method and characterized using X-ray diffraction (XRPD), specific surface (BET), transition electron spectroscopy (TEM) and magnetization measurements. A temperature programmed desorption (TPD) study of the water and CO interaction with nanocrystalline adsorbents is presented. The catalytic activities towards CO oxidation increased in the following order: γ-Fe2O3 < MnxZn1-xFe2O4 < Au/γ-Fe2O3 .