HOME CONTACT My eBook

Username: Password:

> @scientific.net

Articles by author: Byeong Soo Lim

• A Nondestructive Life Evaluation Using Creep-Fatigue Damage by SDA
  Published in: Advances in Safety and Structural Integrity 2005 (p105)
• A Study on Fatigue Strength Improvement of Aluminum Alloy Resistant Spot Welds by Cold Working
  Published in: THERMEC 2006 (p3961)
• Analysis of Creep Crack Growth by Intelligent Phased Array Ultrasonic Inspection
  Published in: Advances in Fracture and Failure Prevention (p1319)
• Application of Ultrasonic Test on Creep-Fatigue Life Evaluation
  Published in: Advanced Nondestructive Evaluation I (p476)
• Creep Characteristics and Micro-Defects of Main Steam Pipe Steel at High Temperature
  Published in: Experimental Mechanics in Nano and Biotechnology (p1129)
• Creep Crack Growth in P92 and P122 Alloy Steel Weldment
  Published in: Advances in Fracture and Strength (p446)
• Creep Life Evaluation by Micro-Cavities
  Published in: Advances in Fracture and Strength (p1858)
• Creep, Tensile and Oxidation Properties of Ti-4wt%Fe-(0~2)wt%Si Alloys
  Published in: Advances in Fracture and Strength (p371)
• Effect of Creep Holding Time on the Fatigue Behavior in P92 Steel Weldment at High Temperature
  Published in: PRICM-5 (p4211)
• Effect of Loading Frequency on Fatigue Crack Growth Behaviour and Microstructural Damage in P92 HAZ
  Published in: Safety and Structural Integrity 2006 (p21)
• Evaluation of Creep-Fatigue Life Using Backscattering of Rayleigh Surface Wave
  Published in: Advances in Fracture and Strength (p415)
• Fatigue Crack Growth Rate in Low ΔK Range According to the Microstructure and Temperature in P122 Alloy Weldment
  Published in: Progresses in Fracture and Strength of Materials and Structures (p545)
• Influence of Dwell Time on Creep-Fatigue Crack Growth Behavior of P92 Steel Weldment at High Temperature
  Published in: Advances in Fracture and Strength (p794)
• Influence of Hold Time on Creep-Fatigue Life and Metallurgical Degradation at High Temperature
  Published in: Fracture and Strength of Solids VI (p1013)
• Inspection of Creep Defects and Degraded Zone Using Ultrasound
  Published in: PRICM-5 (p4141)