Papers by Author: C. Li

Abstract: The hinge-type turning fashion has been widely adopted in wheel loader. During the process of design, two kinds of parameters, stability and stability coefficient, have been thought out to evaluate a loader’s transverse stability. Majority of cultural documentary adopts the evaluation method of stability currently.In this paper, the opinion that the stability coefficient can be used to evaluate transverse stability is more reasonable and viable, which is proved and analyzed through experiments.It is certificated by theory and practice: Using the stability coefficient to evaluate a loader’s transverse stability is more scientific and exact. It has some significance to direct the design, manufacture and use of the wheel loader.

Abstract: China Low Activation Martensitic steel (CLAM), which is one of the RAFMs (Reduced Activation Ferritic/Martensitic steels) and under development in ASIPP, is considered as the primary candidate structural material and LiPb eutectic as both tritium breeder and coolant of the blankets in FDS series fusion reactors. The corrosion behavior of CLAM steel exposed to the liquid breeder LiPb is of significance. Corrosion tests of CLAM in flowing LiPb at 480°C were performed up to about 2000 hrs to analyze the corrosion mechanism of CLAM exposed to liquid LiPb. The specimens were observed and analyzed by Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) after 500hrs, 1000hrs and 2000hrs corrosion experiment respectively. The corrosion is of non-uniform and the weight loss was about 0.23 mg/cm2 after 2000 hrs’ exposure, which is smaller for CLAM compared to those of other RAFMs.