Papers by Author: Charles-André Gandin

Abstract: The coupled two dimensional (2D) Cellular Automaton (CA) Finite Element (FE) model has been extended based on the recent work by Guillemot et al. [1]. Extensions concern i microsegregation at the scale of the CA cells ii macrosegregation at the scale of the FE mesh based on a remeshing technique. The model is applied to segregation taking place upon single grain nucleation and growth from the centre of a spherical domain. The simulation retrieves the prediction of Heringer et al. [2]. Application to solidification of a spherical Al-4wt%Cu droplet demonstrates its capability to deal with mass exchange by diffusion outside the grain envelope defined by the mushy zone together with back diffusion in the solid [3].

Abstract: Simulations of several laboratory experiments developed for the study of structure and segregation in casting are presented. Interaction between the development of dendritic grain structure and segregation due to the transport of heat and mass by diffusion and convection is modeled using a Cellular Automaton - Finite Element model. The model includes a detailed treatment of diffusion of species in both the solid and liquid phases as presented elsewhere in this volume [1]. Applications deal with prediction of columnar and equiaxed grain structures, as well as inter-dendritic and inter-granular segregations induced by diffusion and macrosegregation induced by thermosolutal buoyancy forces.

Abstract: The main objective of the research project of the European Space Agency (ESA) - Microgravity Application Promotion (MAP) programme entitled Columnar-to-Equiaxed Transition in SOLidification Processing (CETSOL) is the investigation of the formation of the transition from columnar to equiaxed macrostructure that takes place in casting. Indeed, grain structures observed in most casting processes of metallic alloys are the result of a competition between the growth of several arrays of dendrites that develop under constrained and unconstrained conditions, leading to the CET. A dramatic effect of buoyancy-driven flow on the transport of equiaxed crystals on earth is acknowledged. This leads to difficulties in conducting precise investigations of the origin of the formation of the equiaxed crystals and their interaction with the development of the columnar grain structure. Consequently, critical benchmark data to test fundamental theories of grain structure formation are required, that would benefit from microgravity investigations. Accordingly, the ESA-MAP CETSOL project has gathered together European groups with complementary skills to carry out experiments and to model the processes, in particular with a view to utilization of the reduced-gravity environment that will be afforded by the International Space Station (ISS) to get benchmark data. The ultimate objective of the research program is to significantly contribute to the improvement of integrated modelling of grain structure in industrially important castings. To reach this goal, the approach is devised to deepen the quantitative understanding of the basic physical principles that, from the microscopic to the macroscopic scales, govern microstructure formation in solidification processing under diffusive conditions and with fluid flow in the melt. Pertinent questions are attacked by well-defined model experiments on technical alloys and/or on model transparent systems, physical modelling at microstructure and mesoscopic scales (e.g. large columnar front or equiaxed crystals) and numerical simulation at all scales, up to the macroscopic scales of casting with integrated numerical models.