Papers by Author: Chen Gang Pan

Abstract: This article established 3D FE model of dual-radius arc finishing groove and tangent expansion angle finishing groove using ANSYS / LS-DYNA software for Wuhan Iron and Steel plant Ф16 hot continuous bar, and analyzed metal flow pattern, stress and strain distribution of two types finishing grooves. The results show that surface stress and strain distribution of dual-radius arc finishing groove have better uniform than them of tangent expansion angle finishing groove, and dual-radius arc finishing groove ensures the stability of the rolled piece in finishing groove, improve the dimensional accuracy and surface quality of rolled finishing product.

Abstract: A 3-D modeling based on the numerical resolution of fluid flow and heat transfer for laser-cladding processes of In718 Superalloy is proposed. The implementation of developed procedures allowed us to treat the problem with specific and complex boundary conditions. The applied loading is a moving heat source that depends on process parameters such as power density, laser beam diameter and scanning speed. The effects of process parameters on the melt pool are quantitatively discussed by numerical analysis. The computational results present good coincidences with the corresponding experiments of laser cladding process.