Papers by Author: Dominique H.R. Morin

Abstract: A process for the precipitation of trivalent arsenic sulphide in sulphate-reducing condition at low pH would be very attractive due to the high arsenic content (60%) in the final precipitate. A bacterial consortium able to reduce sulphate at pH 4.5 served to inoculate column bioreactors that were continuously fed with As(V) or As(III), glycerol and/or hydrogen, at pH values between 2 and 5. The diversity, functionality and evolution of the consortium colonizing the bioreactors were characterized by means of biomolecular tools, in relation with operating parameters (pH, As, sulphide, acetate). The highest As removal rate obtained during these experiments was close to 3 mg.l-1.h-1 using As(V) as the initial arsenic form, while precipitation rates were improved using As(III). When glycerol was replaced by hydrogen in a bioreactor containing a mature biofilm, sulphate-reducing activity increased roughly. Organisms related to Desulfosporosinus were the only sulphate-reducing bacterium (SRB) detected in the bioreactor. arrA genes, involved in As(V) dissimilatory reduction, were also detected and suggested that As(V) was reduced by a Desulfosporosinus-like organism. Molecular fingerprints evidenced an evolution of the bacterial population structure according to changes in operating conditions.

Abstract: In the frame of a European project (BioMinE - FP6), a continuous bioleaching operation was carried out in a laboratory-scale unit using a cobaltiferous pyrite. The objective of the work was to use this system to investigate mechanisms of microbial activity and mineral oxidation in continuous stirred bioreactors (1x50L - 3x20L). A combination of scientific and technical approaches (molecular ecology, biochemistry and microscopy) was used and various key operating parameters were tested (temperature, nitrogen source, CO2 availability, designed consortia). An increase of temperature of 10°C (35°C to 45°C) had no major influence on the bioleaching efficiency. When the ammonium source was limiting, there was a negative influence on both bacterial growth and bioleaching efficiency. This result was related to a combination of factors such as less bacterial attachment to the pyrite surface and less precipitate formation. CO2 limitation had a very significant negative effect on the bacterial productivity and consequently on the bioleaching efficiency. Nevertheless, the population composition remained unchanged. An important decrease of EPS (sugar) production was also observed. The bacterial strains, that dominate the culture, originated from the deposit in Uganda. It seems that their bioleaching ability was improved over the time when cultured in continuous mode. The culture composition was very stable. The iron-oxidizer L. ferriphilum was the dominant organism in standard (not limiting) conditions, and was always very well represented during the first 3-4 days of residence time. Sulfobacillus sp. BRGM2 also played an important role in the process. This study gives new insights for the application of this technology, and more specifically on the influence of key operating parameters on bioleaching performances, population dynamics and attachment of bacteria to the solid surfaces.