Papers by Author: Feng Lan Wei

Abstract: In this essay, the charactristc index of the humidity controlling material is breifly illuminated, based on which, an observing experiment in a small enclosed box is made. According to the experimental phenomenon and the basic principles of the thermodynamics, the formulation of the humidity parameter in a closed space of greenhouse is derived, from the angle of two-phase equilibrium. We assert that the purpose of using B,the charateristic parameter, is to ensure that the temperature of the subjest is zero. So when the temperature is not zero, using this parameter will cause error. Since the imperfection of B, it is necessary to use another parameter, BT, which is derived according to the temperature of the subject and proved more reasonable, to reply the former one. Both parameters can reflect the combination of the material and the moisture, which relate to the binding energy. The humidity controlling character proves better, if the binding energy becomes closer to that of two pure water molecules.

Abstract: The effect of compound modification and various kinds of heat treatment on microstructure and mechanical properties of the low chromium white cast iron was studied.The results showed that,after modification,the carbide morphology in cast iron has been greatly improved;the annealed modified cast iron is suitable for machining;both martensitic quenching and austempering can cause the hardness and the impact toughness of modified cast iron increase greatly.

Abstract: The effect of austenitizing temperature, heating time and tempering temperature on hardness and impact toughness of low chromium white cast iron was studied by orthogonal test. The optical microstructure was used to analyze the reasons of changes on mechanical properties. The results showed that the hardness increases at beginning and then decreases with the increase of each parameter, high impact toughness can be obtained at high tempering temperature and high austenitizing temperature, the descending order of influence on hardness and impact toughness is austenitizing temperature, heating time, tempering temperature.