Papers by Author: Fu Gao Wei

Abstract: Nanoindentation technique was applied to evaluate nanohardness distribution in a submicron scale for two kinds of martensitic steels: Fe-0.4C binary steel and Fe-0.05C-0.22Ti steel with a stoichiometric composition of TiC. AFM images showed that Fe-C steel includes relatively coarse cementite particles with about 100~200 nm in diameter and a couple of hundreds nanometer in average spacing, while high-resolution TEM observation showed that the Fe-C-Ti steel has fine TiC precipitates with 5 nm in diameter and 15 nm for average spacing. Nanoindentation results revealed that the standard deviation was much higher for the Fe-C than that for the Fe-C-Ti. Since the typical indent size was a couple of hundreds nanometer, which was about two orders larger than the size of the TiC and comparable to the cementite size, the small distribution of nanohardness of the Fe-C-Ti was attributed to the homogeneous microstructure in sub-micron scale, while the inhomogeneity of cementite particles in the Fe-C steel leaded to large nanohardness.

Abstract: Hydrogen absorption of incoherent TiC particles that were once reported to be strong hydrogen traps in iron at room temperature was investigated by means of thermal desorption spectrometry (TDS). The results indicated that incoherent TiC particles in iron do not trap hydrogen at all at room temperature even they are cathodically charged for a long time. Only at high temperatures and in atmosphere containing hydrogen source, incoherent TiC particles can trap hydrogen. The origin of hydrogen trapped by incoherent TiC particles was justified to be water vapor in the atmosphere during heat treatment.

Abstract: A new method has been developed to determine the activation energy for hydrogen desorption from steels by means of thermal desorption spectrometry (TDS). This method directly fits the Kissinger’s reaction kinetic formula dX/dt=A(1-X)exp(-Ed/RT) to experimentally measured thermal desorption spectrum and best fit yields the activation energy (Ed) and the value of constant A. It has been proven that this new method is applicable to precise measurement of the activation energy for hydrogen desorption from incoherent TiC particle, coherent TiC precipitate, grain boundary and dislocation in 0.05C-0.20Ti-2.0Ni and 0.42C-0.30Ti steels.