Papers by Author: Fu Long Dai

Abstract: TiNi/Al-12%Si alloy is a kind of prospective material used as special energy absorbers for eliminating undesirable noise and mechanical vibration. The investigation on the mechanical properties of this composite alloy is of great importance. In this study, the surface deformation of TiNi/Al-12%Si composite alloy under external loading was measured experimentally by means of DSCM method. Some deformation characteristics of TiNi/AlSi composite alloy under the effect of the tensile load and the interaction between TiNi and AlSi are discussed. In addition, the elastic modulus and the poisson ' s ratio of this alloy were measured as well. The results agrees well with the theory predicts.

Abstract: The spider silk is considered as a new type of biomaterials with its excellent mechanical properties. The mechanical properties of the spider silk are crucial to their applications. In this study the mechanical properties of spider silk were studied with a micro-tensile system driven by magnet-coil force actuator, which is very effective to measure the properties of low dimensional materials. The Young’s modulus of the spider silk is obtained, the relationship between the mechanical properties of spider silk and time is also acquired.

Abstract: Martensitic phase transformation can greatly affect the mechanical behaviors and the stress-strain response of shape memory alloys (SMAs). In this study, the effect of martensitic phase transformation on the deformation of a single-crystal TiNi SMA specimen with a triangle crack was investigated experimentally by means of moiré interferometry method. A typical displacement field and the corresponding strain field in areas both around and far from the tip of the crack were measured in a certain time during the loading process in which the tensile load is coupled with the stress-induced martensitic phase transformation. Some characteristics of the deformation and the martensitic phase transformation of the specimen are revealed. These results may provide a reliable support for revealing the fracture mechanism of single crystal TiNi SMAs, and may enable further development in putting forward the failure criterion of SMAs.