Papers by Author: Giin Shan Chen

Abstract: In the present study, Ti50Cu28Ni15Sn7 metallic glass and its composite powders reinforced with 4~12 vol% of SiC additions were successfully prepared by mechanical alloying. The as-milled Ti50Cu28Ni15Sn7 and composite powders were then consolidated by vacuum hot pressing into disc compacts with a 10 mm diameter and thickness of 2 mm. The structure of the as-milled powders and consolidated compacts was characterized by X-ray diffraction. While the thermal stability was examined by differential scanning calorimeter. In addition, the mechanical property of the consolidated bulk metallic glass and its composite was evaluated by Vickers microhardness tests. In the ball-milled composites, initial SiC particles were homogeneously dispersed in the Ti-based alloy glassy matrix. The presence of SiC particles did not dramatically change the thermal stability of Ti50Cu28Ni15Sn7 glassy powders. BMG composite with submicron SiC particles homogeneously embedded in a highly dense nanocrystalline/amorphous matrix was successfully prepared. A significant hardness increase with SiC additions was noticed for consolidated composite compacts.

Abstract: In the current study, the amorphization behavior of mechanically alloyed Ni57Zr20Ti22Pb1 powder was examined in details. The conventional X-ray diffraction results confirm that the fully amorphous powders formed after 5 hours of milling. The thermal stability of the Ni57Zr20Ti22Pb1 amorphous powders was investigated by differential scanning calorimeter (DSC). As the results demonstrated, the glass transition temperature (Tg) and the crystallization temperature (Tx) are 760 K and 850 K, respectively. The supercooled liquid region

 is 90 K. The appearance of wide supercooled liquid region may be mainly due to the Pb additions which cause the increasing differences in atomic size of mechanically alloyed Ni57Zr20Ti22Pb1 powders.