Papers by Author: H.J. Xu

Abstract: It is essential to control the heat generated in the cutting zone in order to ensure the workpiece quality after grinding. This article deals with an investigation in using graphite and hexagonal boron nitride as solid lubricants to reduce friction and thereby improve the surface integrity of Ti-6Al-4V alloy. The polymer-based solid lubricant coating wheels have been prepared. Grinding experiments have been conducted to study the effect of the graphite and hexagonal boron nitride lubricants on the grinding temperature and the surface quality of the workpiece while grinding Ti-6Al-4V. Results indicate that there is a considerable improvement in the performance of grinding Ti-6Al-4V using graphite and hexagonal boron nitride as solid lubricants in dry grinding in terms of grinding temperature and surface quality of the work piece. The indigenous polymer-based solid lubricant coatings are effective in dry grinding.

Abstract: An investigation was undertaken to explore the grinding energy and removal mechanisms in grinding zirconia by using brazed diamond wheels. The grinding forces were measured and the morphological features of ground workpiece surfaces were examined. The results indicate that material removal mechanisms are dominated by the combined removal modes of brittle and ductile. The prevailing removal mechanism for the ground surface of zirconia changes from brittle to ductile when the maximum chip thickness change from large to small.