Papers by Author: H.K.D.H. Bhadeshia

Abstract: The surface of body-centred cubic Fe-7Al (mass%) alloy plate was successfully modified by friction stir processing with SiC particles addition. The stir zone with SiC addition had an average grain size of 5.9 μm, smaller than that of 10.1 μm in the stir zone without SiC addition. SiC particles introduced by friction stir processing were converted to fine Fe₃AlC_x particles by reaction with the ferrite matrix. The hardness near the surface of the stir zone was significantly increased to 351 HV by introduction of particles, compared to the hardness of 200 HV in the stir zone without particles addition. The dispersed particles also contributed to suppression of grain growth of the matrix at elevated temperature.