HOME CONTACT My eBook

Username: Password:

> @scientific.net

Articles by author: He Ping Zhou

• (1-x)(K_0.475Na_0.475Li_0.05)(Nb_0.975Sb_0.025)O₃-xBiFeO3 Lead-Free Piezoelectric Ceramics with CuO Sintering Aid
  Published in: Functional and Electronic Materials (p228)
• <001> Textured Pb(Mg_1/3Nb_2/3)O₃–PbTiO₃ Ceramics Prepared by Reactive Templated Grain Growth
  Published in: High-Performance Ceramics IV (p24)
• A Comparison Study on Microstructure and Mechanical Properties of Si₃N₄ Ceramic Prepared from MACS Powders
  Published in: High-Performance Ceramics IV (p1179)
• An Experimental Study on Combustion Synthesizing of Plane Ceramic Coating
  Published in: High-Performance Ceramics 2001 (p609)
• Bonding Al on Al₂O₃ Substrate
  Published in: High-Performance Ceramics 2001 (p755)
• Combustion Synthesis of Ti(C,N) Powder
  Published in: High-Performance Ceramics III (p1421)
• Combustion Synthesis of TiN_x C_1-x Powders with Ultra Fine Particle Size by Using Titanium Oxide as Dilution
  Published in: High-Performance Ceramics III (p1429)
• Combustion Synthesis of β-Si₃N₄ and β-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO₃ and NH₄F
  Published in: High-Performance Ceramics V (p865)
• Effect of CaTiO₃ Content on the Dielectric Properties of Ba_0.5Sr_0.5TiO₃
  Published in: High-Performance Ceramics III (p89)
• Effect of PbO Concentration on the Templated Grain Growth of PMN-32.5PT Ceramics
  Published in: High-Performance Ceramics V (p15)
• Effects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn₂O₄ Prepared by Solution Combustion Synthesis
  Published in: High-Performance Ceramics V (p296)
• Effects of Technical Parameters on the Phase Composition and Microstructure of Yb α-SiAlON Prepared by Combustion Synthesis
  Published in: High-Performance Ceramics III (p1237)
• Electrophoretic Deposition Ba_0.65Sr_0.35TiO₃ Thick Films for Tunable Microwave Devices
  Published in: High-Performance Ceramics IV (p111)
• Fabrication of Cr₃C₂-AlN-FeCr Cermet Coating by Combustion Synthesis
  Published in: Advanced Ceramics and Composites (p195)
• Fabrication of Heater Element in Release System
  Published in: High-Performance Ceramics IV (p769)