Papers by Author: Hong Min Guo

Abstract: In this paper, the castings of A356 alloy were made by the rheo-squeeze casting with slurry-making from the process of LSPSF. Experiments were designed to study the influence of three parameters in rheo-squeeze casting process, such as injection speed, mould preheating temperature and injection pressure, on castings performance. The results show that high-quality castings were produced with the injection speed of 0.5m/s ,the mould preheating temperature of 240°C, the injection pressure of 50MPa. The mechanical properties, such as the yield strength, tensile strength and elongation of the castings with T6 heat treatment are 241 MPa, 328MPa and 11.6%, respectively.

Abstract: Chitosan was crosslinked using epichlorohydrin as crosslinking agent to prepare crosslinked chitosan which was used as an adsorbent for the removal of Zn(II) from aqueous solutions. The adsorption prosperities of Zn(II) on crosslinked chitosan were studied, including the influence of pH value and the adsorption kinetics. The kinetics of adsorption was discussed using two kinetic models, the pseudo first-order and the pseudo second-order model. Results reveal that the crosslinked chitosan is suitable as adsorbent to remove Zn(II) from dilute solution. The rate parameters for the Zn(II) by crosslinked chitosan were also determined. It was shown that the adsorption kinetics of Zn(II) could be best described by the pseudo second-order model and the adsorption process may involve a physical adsorption.