Papers by Author: Hua Hao

Paper TitlePage

Abstract: The purpose of this paper is to study the feasibility of nano-material (1~100nm) level powder preparation by wet ball milling. The powder was used to prepare the ceramic and the performance of the ceramic was analyzed. The experimental results show that the average particle size of the powder is close to nano-material level (around 120nm) and the ceramic possess high compactness, high dielectric constant and low dielectric loss.
7
Abstract: Steady organic-inorganic perovskite hybrids with (H22-Ap)3/2Fe(CN)6, (H23-Ap)3/2Fe(CN)6 and (H24-AP)3/2Fe(CN)6 (2-AP = 2-aminopyridine, 3-AP = 3- aminopyridine, 4-AP = 4- aminopyridine) were formed from aqueous solution. Each structure was an unusual layered organic-inorganic structural type. A device was designed to construct electrochemical sensing devices using above organic-inorganic perovskite hybrids. The sequence of redox activity is (H24-Ap)3/2Fe(CN)6 > (H22-Ap)3/2Fe(CN)6 > (H23-AP)3/2Fe(CN)6 and that of electrocatalytical activity is (H22-Ap)3/2Fe(CN)6 > (H23-Ap)3/2Fe(CN)6 > (H24-AP)3/2Fe(CN)6. The variation coefficients (RSD) of successive and interval assays are less than 2.0%. Three electrochemical sensing devices display a remarkable electrochemical sensitivity and stability.
239
Abstract: Lead-free (1-x)K0.5Na0.5NbO3–xLiNbO3 piezoelectric ceramics have been prepared by a conventional solid state process. The phase structure and the electrical properties of the ceramics were studied. A polymorphic phase transition (PPT) between the orthorhombic and tetragonal phases was identified in the composition range of 0.08
2037
Abstract: Temperature-dependent Raman scattering, dielectric properties, and Impedance spectra have been carried out on Ba(Ti0.8Sn0.2)O3 ceramic sample. The number of modes observed for the compositions of cubic symmetry is more than that predicted by group theory, and the A1(TO1) and E(TO2) modes become Raman active below the critical temperature (around 300K) in the lower frequency region. This gives evidence that there are some deviations of the local structure from the average global symmetry. Moreover, The characteristic of A1(TO3) mode is confirmed be associated with the diffused dielectric properties. Impedance/modulus analyses indicate that a third resistance-capacitance (RC) response is present in the sample, in addition to the grain and grain-boundary RC elements above 573K. Thus, it probably inferred that the existence of inter- and/or intra-granular surface layers associate with the abnormal dielectric properties, which is different from the normal ferroelectrics. Variation of bulk ac conductivity as a function of temperature shows that Ba(Ti0.8Sn0.2)O3 follows the classical Arrhenius relation.The results show that the activation energy of grains and grain boundaries are 0.61 and ~1.08 eV, respectively.
1998
Showing 1 to 4 of 4 Paper Titles