Papers by Author: Hui Wen Hu

Abstract: This research aims at the development of faucet using the techniques of hydroforming and bending. In this study, a tube made from stainless steel SUS 304 is used. Finite element model, including tube, dies and punches, are established using a commercial code LS-DYNA. Tensile test is used to obtain the material properties especially in true stress-strain curve. Piecewise linear plasticity model is used to simulate the plastic deformation of material during the forming process. The initial internal pressure is designed by using the theory of thick-walled cylinder subjecting to internal pressure only. Simulation is first used to find the optimal loading conditions for hydroforming and bending forming. Experiment is then performed to fabricate the prototype of faucets using the simulated loading parameters. The results show that good correlation of the distributed thickness and profile dimension between simulation and experiment are obtained.

Abstract: This paper presents a damage detection of surface crack in composite laminate. Carbon/epoxy composite AS4/PEEK was used to fabricate a quasi-isotropic laminate [0/90/±45]2s. Surface crack was created by using laser cutting machine. Modal analysis was performed to obtain the mode shapes of the laminate before and after damage. The mode shapes were then adopted to compute the strain energy, which was used to define a damage index. Consequently, the damage index successfully predicted the location of surface crack in the laminate. Differential quadrature method (DQM) was introduced to calculate the partial differential terms in strain energy formula.