Papers by Author: In Ho Han

Abstract: Various composition of calcium-silicate thinfilms were deposited to the thickness of 1μm by electron-beam deposition. The composition was varied by changing the composition of source. The Si concentration of thinfilm was ranged from 25 at% to 85 at%, evaluated by EDS. The specimens were immersed into PBS solution at 37 °C. Changes of the morphology and calcium phosphate formation on the specimens were examined by SEM. If the concentration of calcium is high, the calcium phosphate was quickly formed on the specimen. However, the calcium phosphate formed on the high calcium oxide concentration exhibited very poor adhesion onto the substrate. There is a range of appropriate calcium oxide concentration to use as a surface modification method for dental or orthopedic implants.

Abstract: The surface morphology of commercially pure titanium was investigated with varying electrical waveform. Controlling of electrical pulse width is effective to change pore sizes. Longer electrical pulse width was induced, larger size of pores were generated.

Abstract: The surface properties of scaffolds are important since cell affinity is the most crucial factor to be concerned when the biodegradable polymeric material is utilized as a scaffold in tissue engineering. The surface of biodegradable non-porous poly (lactic-co-glycolic acid) (PLGA) scaffolds were treated by atmospheric pressure dielectric barrier discharge (APDBD). The wetting angle of APDBD treated PLGA were decreased from the untreated PLGA of 73° to 42°. FTIR-ATR analyses showed hydroxyl groups were not detected regardless of treated condition, but the intensities of both ether groups and carbonyl groups were increased with treatment time and oxygen flow rate. Treatment time and oxygen flux are equally effective to make the PLGA surface more hydrophilic.