Papers by Author: Ivan Pérez

Abstract: Over recent years, some severe plastic deformation processes have been developed with the aim of obtaining a material with sub-micrometric or even nanometric grain size, such as: ECAE (Equal channel angular extrusion) and HPT (High pressure torsion) among many others. The main aim of this present study is to analyse the upsetting of the 5083 Al-Mg-Mn alloy, which had been previously deformed by ECAE. Different processing temperatures will be used and the final properties of the resulting material will be determined.

Abstract: Recent studies have shown that severe plastic deformation processes (SPD) improve the mechanical properties of the processed parts. Some of the most outstanding SPD processes are as follows: High Pressure Torsion (HPT), Repetitive Corrugation and Straightening (RCS), Cyclic Extrusion Compression (CEC), Accumulative Roll Bonding (ARB), Conform and Continuous Combined Drawing and Rolling (CCDR), among others, but the most well-known is Equal Channel Angular Extrusion or Pressure (ECAE/ECAP). The aim of these processes is to introduce high values of deformation inside the parts in order to reduce the grain size and thus to improve the mechanical properties of the starting material. The study of the damage imparted to an AA-6082 alloy is made in the present work. This alloy is received as cast and it is quenched at a temperature of 530 °C during 4 hours in order to be processed by ECAE at room temperature using different geometries of the dies. The imparted damage is also studied by using FEM simulations.