Papers by Author: Ji Dong Zhong

Abstract: β-Si3N4 and β-SiAlON powders were prepared by combustion synthesis with SrCO3 and NH4F used as additives. The resultant β-Si3N4 and β-SiAlON powders consisted of elongated prismatic microcrystals. By adding SrCO3, the anisotropic growth of β-Si3N4 and β-SiAlON crystals is improved and their aspect ratios increase. The addition of NH4F enhanced nitridation reactions and reduced the residual Si in combustion products. It was proposed that the elongated prismatic β-Si3N4 and β-SiAlON crystals grew from liquid phase and the composition and property of this liquid was affected by the addition of SrCO3.

Abstract: Effect of iteration times on mechanically-activated combustion synthesis of high α-content Si3N4 powders was investigated. Properties of the as-synthesized powders such as α-content (Cα) as well as specific surface area (As) were examined. Results showed that both of Cα and As became higher after iteration reactions. The mechanical properties of the sintered bulk ceramics from as-synthesized powders were also tested to reveal the sinterability of the powders. Results showed that relative density of all the sintered bulk ceramics were higher than 97%. Furthermore, fracture toughness had a trend of becoming higher, which reached a value of 10.2 MPam0.5. Correspondingly, bending strenth became a bit lower.