Papers by Author: Jian Hui Zhang

Abstract: Postponed-set mortar (PSM) is a new type material applied in prestressed concrete components. Successive coating a lay of PSM on prestressed strand is a key to engineering application. On the basis of experimental investigation, the model of PSM screw conveying is built by using the theories of rheology, and the flow for PSM in a single-screw coating machine is studied. The experimental results suggest that the Bingham plastic’s PSM can be conveyed by screw and coated on prestressed strand. It is achieved that PSM and polyethylene sheath is automatically and successively coated on prestressed strand only once by using the machine.

Abstract: Fe3O4 ferrofluids with uniform magnetic particles were prepared via improved chemical coprecipation technique. A narrow distribution of 8.6-10.8 nm particle sizes was obtained from the magnetization curve using the free-form-model based on Bayesian inference theory. The mean particle diameter about 9.8 nm is consistent with the XRD and SEM results. The hydrodynamic properties of ferrofluids were investigated with different applied magnetic field and shear rate. The experimental results show that diluted ferrofluid and concentrated ferrofluid are Newtonian-fluid and Bingham-plastic fluid, respectively.

Abstract: Microstructural information obtained for silicon-alloyed pyrolytic carbon coatings used for heart valves using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy is described. The coatings consist of two phases, pyrolytic carbon and β silicon carbide, whose crystallite sizes are small. The coatings are principally composed of spherical particles that are from 300 to 1000 nm in diameter. These spherical particles, between which there are occasionally pores, are welded by laminar carbons. The silicon, content of which is moderate, disperses uniformly in the coatings.

Abstract: The structure and property of pyrocarbon varies widely with different deposition conditions. The isotropic carbon which can only been deposited in the bed of fluidized particles is very important in biomedical fields, for instance, it is often used as the coating of artificial heart valve components. The deposition of isotropic pyrocarbon containing silicon is experimented in fluidized bed over a wide range of deposition conditions. The results show that bed temperature influences strongly average coating rate, coating density, silicon content and coating micro-hardness. Propane concentration has a much effect on coating density, carbon matrix density and isotropic characteristics. Total gas flow rate and inlet dimension of fluidized bed affect the formation of fluidized bed.