Papers by Author: Jian Tao Yao

Abstract: For the real-time pose adjustment of the sub-reflector of antenna to ensure its best condition, Stewart platform-based mechanism is adopted. This paper presents the configuration optimization of the adjusting parallel mechanism taking the minimum force acted on each limb as the target, and the basic structural parameters of the mechanism are obtained. Considering the weight of the moving platform, the external load, and the influence of the snow and the wind, the maximum force acted on the limbs of the mechanism in the required workspace is calculated, which established the foundation for the structural design of the mechanism. The contents of this paper possess theoretical significance and engineering value for the development of the adjusting mechanism for the sub-reflector of antenna.

Abstract: The hardware control system of the 5-UPS/PRPU PMT (parallel machine tool) with redundant actuation was reconstructed to realize its hybrid force/position control, which was based on the primary “IPC+PMAC motion controller” system mode. Meanwhile, more perfect open type PMT control platform was constructed. Visual Basic language was used to realize the force servo control of the redundant limb and the relevant experiment was completed in the primary CNC system, combining with the PAMC motion controller library function. The results show that the force servo control strategy is exact and the newly designed hardware control system is effective, these results also provide feasible hardware basis and control method to realize the hybrid force/position control.