Papers by Author: Jie Ren Yang

Abstract: The effects of technical parameters on initial silicon melting in cold crucible continuous casting were studied. These parameters include the materials, the shape and the position of the base, the mass of the silicon that set on the top of the base. Through experimental and theoretical analysis, the optimized parameters were finally given: the base graphite with obconical shaped should be put at the level of the second turn of the coil, and the initial silicon with 10g should be put on the base. The mechanism of these parameters affecting on the initial melting are discussed and revealed.

Abstract: In this study, Ti46Al0.5W0.5Si ingots were directionally solidified by a near-rectangular cold crucible under different process parameters. These process parameters include the electromagnetic stirring, the crucible configuration and the molten drop, all of them have important effect on the S/L interface. The effects of the parameters on the solid/liquid (S/L) interface morphology were investigated, and the mechanisms of the parameters influencing the S/L interface were discussed and revealed. Results showed that the typical S/L interface of the ingots was presented as a curved ‘W-type’ shape. The uneven temperature distribution in the front of the solidified interface is the main reason for a curved S/L interface. Further, the requirements for obtaining a planar S/L interface in the process of cold crucible directional solidification were given, which provided a guide for the future work.

Abstract: This paper gives a detailed study of temperature distribution on Ti46Al0.5W0.5Si alloy directionally solidified by cold crucible. Based on experiment and numerical calculation, the heating process under different power was investigated, and the operating efficiency of cold crucible was roughly calculated. Further, the temperature field of Ti46Al0.5W0.5Si alloy under high power was numerically calculated, the finite element model predicted the temperature distribution at different moment. The results give a significance guide on cold crucible directional solidification.

Abstract: A square shaped silicon ingot was cast by cold crucible continuous casting. The grain growth behaviors during different growth stages were investigated. In the first, grains nucleate at the base surface in the centre and in the three phase junction at periphery, and then grow upwards and inclined upwards separately. In the second, grain grow competitively, two distinguished zones are formed. In the final, a cap is formed on the liquid free surface, and precipitates are present.

Abstract: This paper has systematically studied the evolving process of column crystals of Ti46Al0.5W0.5Si alloys that is directionally solidified by rectangular cold crucible. The results showed that: the solid/liquid interface presented convex to the liquid metal due to the complicated influences by cold crucible. Overheating temperature and new crystal nucleus had great effects on the growth continuity and the stability of column crystals. Furthermore, the precipitation phases have been studied. As a result, the methods for controlling growing process of columnar crystals have been submitted, which are playing a critical role in optimizing experimental parameters and devising the construction-elements of cold crucible.