Papers by Author: Jing Shu Hu

Abstract: In this study, hard turning GCr15 bearing steel with high cutting speed is experimental investigated the influence of the CB7015WH insert with chamfer edge and Safe-Lock and the CB7015 insert with a combination of hone radius and a chamfer edge on cutting forces and surface roughness of machined surface. Experimental results show that the cutting forces of the chamfer edge and Safe-Lock is smaller than that of the combination of hone radius and a chamfer edge. Moreover, surface roughness of machined surface with the CB7015WH insert is better. A coupled thermo-mechanical 2D finite element model with general finite element analysis software Deform 2D.8.1 is developed for the influence of two kinds of inserts on cutting forces and effective stress. The simulation results are compared with experimental data and found to be in good agreement.

Abstract: Polycrystalline diamond (PCD) composite sheet is a kind of material for cutter blank, which is formed by uniformly mixing micron diamond particles and metal binder powder such as Co and Ni, then sintered on WC under high pressure and high temperature. PCD tools have broad application and very high commercial value. However, compared with other materials, PCD tools’ service life relies greatly on blade sharpening quality. This paper just experimented on preparing precision blade of CTB002 PCD composite sheet on grinding machine of high precision diamond tools and with different performance parameters of TYROLIT diamond grinding wheel. Rotational speed of grinding wheel, grain size of grinding wheel and grinding pressure were researched in the orthogonal test method, which have the largest influence on grinding process, and influencing rules and the best combination of the three parameters are obtained.