Papers by Author: Jozef Janovec

Abstract: The microstructure characterization of Al73Mn23Pd4 and Al73Mn21Pd6 alloys was done after annealing at 900°C for 312 h and subsequent water quenching, as well as after thermal cycling. DTA and EDX/WDX/SEM techniques were used in the investigation. It was found out that the alloys consist of the single ternary T-phase after annealing and water quenching. The DTA experiment confirmed the stability of this phase also at lower temperatures. After DTA, the alloys exhibited double-phase microstructure consisting of the ternary T-phase and probably the icosahedral I-phase. It was proved an incongruent transformation of the ternary T-phase into the liquid and vice versa.

Abstract: Chemical and structural changes at the grain boundaries were investigated to quantify their influence on fracture behaviour of austenitic stainless steels and model ferritic Fe-Si-P alloys. The balance between the size and the area density of intergranular particles was found to be one of the most decisive factors influencing sensitivity of the steels to intergranular fracture. The precise dependence of the energy of intergranular fracture on the phosphorus grain boundary concentration was also determined.