Papers by Author: Jun Yun Chen

Abstract: The swelling effect is an important factor to affect surface generation in SPDT. Face cutting experiments are conducted for copper, aluminum alloy and electroless nickel phosphorus to analyze the swelling effect including the relationship between it and cutting parameters as well as effect of material property. How the material swelling affects surface roughness is also studied in this paper. The results indicate that the swelling effect is influenced by spindle speed and material property more remarkably when compared to feed rate and depth of cut. In addition, a softer and more ductile material will lead to a stronger material recovery, a lower swelling proportion, a lower tool mark height and a smoother machined surface. The result reveals that the swelling effect must be considered when predicting surface roughness in SPDT

Abstract: Experimental results indicate the previous theoretical model cannot predict well the surface roughness in single-point diamond turning on a precision lathe. In solving that, an improved model was presented in this paper. The difference between the previous model and the improved model is that the relative tool-workpiece vibration is measured before cutting operation using a capacitive displacement sensor in the previous model whilst the vibration is extracted from the measured surface profile in the improved model. The relative vibration was first studied under various cutting conditions to establish the vibration modes under corresponding cutting conditions. Then the surface roughness was predicted based on the vibration modes. The results prove that there is good agreement between the predicted values and measured values and the improved model is useful and reliable.

Abstract: In this paper, a copper-resin bonded diamond wheel was applied to machine the optical glass on a precision grinder. The process of truing and pre-dressing with ELID (electrolytic in-process dressing) were first carried out for the grinding wheels, then the ELID assisted grinding experiments were conducted with the special fine and coarse grained diamond wheels. The experimental results show that the fine and coarse grained wheels can all generated the smooth surface with the surface roughness in nanometer scale and the coarse grained diamond wheel correlates to the slightly more surface damage than the fine grained diamond wheel, which also proves that the high efficient grinding of the optical glass with a good surface quality can be realized with the coarse grained copper-resin wheel on a precision grinder and the grinding wheels were all well conditioned with the conditioning method presented in this paper.