Papers by Author: K.C. Lam

Abstract: Many stiff clays forming part of natural slopes and earth dams exist in the fissured state. When these cracks are subjected to gravity induced normal and shear stresses they may propagate. The present discussion presents a numerical method to study the propagation direction of cracks under stress fields similar to those found in the field. Not only did the results on one crack propagation direction obtained from the numerical method and the analytical results agree well, but numerical results have been used to investigate the mechanisms of the whole process of two horizontal cracks initiation and propagation and coalescence in stiff soils.

Abstract: Based on cusp-type catastrophe theory, a sample rock-rock (hypocenter surrounding the rock) model for studying the pillar rockburst mechanism is presented in this paper. It is expounded theoretically that the stiffness ratio, K, of the roof and floor to the pillar plays an important role in the outbreak of instability. Using a newly developed numerical code, RFPA2D, the progressive failure process and associated microseismic behavior of the twin rock samples are simulated. The numerically simulated results also confirm that a soft roof and floor promotes an unstable failure or collapse of pillars. Additionally, the simulated results reproduced the deformation jump and the energy release that occur during a pillar rockburst. It is demonstrated that the proposed model properly simulates the pillar failure process.

Abstract: Borehole breakout is the process by which portions of borehole or tunnel wall fracture or spall when subjected to compressive stresses. The stress-strain characteristics of rock during loading and unloading confining pressure are studied firstly. To overcome the difficulties in analytical model studies, a numerical code, RFPA2D (Rock Failure Process Analysis), developed by CRISR, Northeastern University, China, is used to investigate the progressive failure of breakout around tunnel. The heterogeneity of rock was also taken into account in the software. The numerical simulation reproduces the formation notch in rocks by the growth, interaction and coalescence of randomly distributed macrocracks. It is illustrated from the numerical simulated results that breakout direction of tunnel is parallel with the minor stress tensor in the plane perpendicular to the borehole axis. Specifically due to the inclusion of heterogeneity, some peculiarities are studied both in the evolution of fracture and the influence of borehole on the peak intensity of specimen as well as the AE event patterns.

Abstract: By using numerical code RFPA2D (Rock Failure Process Analysis), the evolution of fracture around cavities subjected to uniaxial and polyaxial compression is examined through a series of model simulation. It is shown from the numerical results that the chain of events leading to the collapse of the cavity may involve all or some of the fractures designated as primary tensile, shear and remote fracture. Numerical simulated results reproduce the evolution of three types of fractures. Under the condition of no confining pressure, the tensile mode dominates with collapse coinciding with the sudden and explosive appearance of the secondary tensile fracture; at moderate higher confining pressure, the tensile mode is depressed, comparatively, the shear effect is strengthened. Nevertheless, tensile fractures especially in remote fractures stage still play a role; at higher pressure, the shear fracture dominates the remote fractures. In addition, the evolution and interact of fractures between multiple cavities is investigated, considering the stress redistribution and transference in compressive and tensile stress field.

Abstract: Disastrous rock slope failures have been posing a hazard to people’s lives and causing enormous economic losses worldwide. Numerical simulation of rock slope failure can lead to improve the degree of understand of such phenomenon so as to predict and avoid the occurrence of these disastrous events. In order to simulate the global behaviors of rock slope failure under the high seepage pressure and the local behaviors of the occurrence of hydraulic fracture in the pre-existing rock joints effectively, a powerful finite element tools F-RFPA2D, is adopted. The simulation takes into account of the growth of existing fractures and the initiation of new fractures under various of hydraulic pressure in different heterogeneities medium. The behavior of fluid flow and damage evolution, and their coupling action are studied in small specimens that are subjected to both hydraulic and biaxial compressive loadings. The influence of the ratio (the initial horizontal stress to the initial vertical stress) and the distance between the two existing cracks on the fracture propagation behaviors are investigated. Moreover, based on the fundamental study of hydraulic fracture, the progressive failure of rock slope under the influence of the increase in hydraulic pressure was also studied in the paper.