Papers by Author: Kiyohito Okamura

Abstract: The atomic scale structure of amorphous Si-C-O ceramics fibers produced from the pyrolysis of a polycarbosilane precursor has been investigated by X-ray diffraction using high-energy synchrotron radiation at SPring-8. First peak in the total correlation function T(r) of the amorphous and the heat-treated fibers is analyzed to consist of two contributions: Si-C (1.89 Å) and Si-O (1.61 Å) bonds. The coordination number of C and/or O around Si is about four. This suggests that the Si-C-O fibers basically have a network structure that consists of two tetrahedral units: SiC4 and SiO4. The local chemical and structural orders vary continuously in the materials from the disordered network structure of SiC4 and SiO4 tetrahedra (mixture of amorphous SiC and SiO2) to nanocrystals of SiC and SiO2, through the ternary Si-C-O solid solution which is believed to have an intermediate structure between the amorphous and crystalline states.

Abstract: SiC fiber reinforced SiC matrix (SiC/SiC) composites are one of the most promising materials for high temperature structural applications such as power generation and propulsion systems. SiC/SiC composites are, however, susceptible to accelerated attacks in water vapor environments through oxidation and volatilization reaction. For protection from such attacks, Environmental Barrier Coatings (EBCs) are indispensable. We have investigated some oxides and rare-earth silicates as topcoat candidate materials for EBCs. Topcoat materials must be stable in the high-water-vapor pressurized environments at high temperatures. Also, it is important that the thermal expansion coefficient of topcoat materials is similar to that of the SiC/SiC composites. In this study, first, zirconium oxides, lutetium silicates and yttrium silicates were selected as topcoat candidate materials. They were exposed in a water-containing atmosphere at a temperature of 1673 K for 100 h under a total pressure 0.96 MPa. Mass changes, structure of crystals and microstructures were investigated after the exposure experiments in order to evaluate the thermal stability of these materials. After their estimation, lutetium silicates were considered to be promising for topcoat materials. Then, lutetium silicates were coated as the topcoat of an EBC system on SiC/SiC composites, and their fracture toughness and microstructures were investigated after exposure to an oxidizing atmosphere. The evaluation results of the topcoat materials are reported in this paper.