Papers by Author: Kyung Shik Cho

Abstract: In Zr-Cu-Ni-Al bulk metallic glasses where there are no dislocations, localized plastic deformation in shear bands occurs largely by the formation and migration of defects such as voids, micropores, shear bands and local variations in composition. Thus, the investigation on defects is critical for the understanding and improvement of plastic deformation in metallic glasses. In this study, microstructures and nano defects in the Zr-Cu-Ni-Al BMGs are characterized by variety of techniques, such as X-ray diffractometry, high resolution transmission electron microscopy, scanning transmission electron microscopy and electron holography.

Abstract: Zr62Cu17Ni13Al8 in the supercooled liquid state is expected to be micro-formable at a relatively low stress. We used X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and quantitative high-resolution TEM (HRTEM) to investigate the microstructures of Zr62Cu17Ni13Al8 amorphous alloy after compression test. The alloy exhibited the homogeneous amorphous microstructure with some crystalline phases dispersed in the matrix. According to the XRD results, under the certain strain rate in the supercooled liquid state, the alloy showed higher crystallization at the higher heat treatment temperature. However, at the same heat treatment temperature, the alloy deformed under low strain rate showed higher crystallization. The β crystalline phase particles with spherical shape were detected by SEM and TEM. The sample with higher strain rate and temperature showed longer shear bands. Nano-voids formed by the coalescence of excess free volume in shear bands were investigated by quantitative HRTEM. Compared with the undeformed area, in the shear band, nanovoids were identified in the deformed area through quantitative HRTEM simulation.