Papers by Author: L. González-Rovira

Abstract: The application of laser beam welding to aluminium alloys has some complications, mainly due to their high reflectivity, high thermal conductivity and low viscosity. In order to increase the laser absorption of aluminium alloys, some surface treatments has been applied in the literature, such as the application of dark coatings or sandblasting. However, these conventional superficial treatments have some drawbacks, such as the low weld penetration, the possibility to undergo magnesium evaporation and the impossibility to control and/or change the superficial properties of the treated samples. In the present contribution, laser texturization treatments have been performed with a fibber laser for the first time on aluminium alloys to increase their absorption and weld penetration. The texturised samples leaded to deeper bead welds than the reference sandblasted samples.

Abstract: Laser beam welding (LBW) show clear advantages compared with other techniques, as the low heat input, the high localization ability, the high welding speed, the high flexibility, the high weld quality and the high production rate. However, its applicability to aluminium alloys is limited, as they generally have high reflectivity, high thermal conductivity and low viscosity. In the present study, the laser weldability of four aluminium alloys (2024, 5083, 6082 and 7075) under conduction regime is analysed. High penetration butt welds could be obtained with a High Power Diode Laser (HPDL) under conduction regime. The properties of the weld beads such as the microstructure and microhardness were analysed. A linear function between the input laser fluence and the volume of melted material was obtained for the four alloys.