Papers by Author: Lars Lottermoser

Abstract: In recent years intermetallic γ-TiAl based alloys with additional amounts of the ternary bcc β Ti(Al,Nb) phase attracted increasing attention due to their improved workability at elevated temperatures. Depending on alloy composition and heat treatment the ductile high-temperature β phase can transform to several ordered phases at lower temperatures. However, currently available phase diagrams of these multiphase alloys are quite uncertain and the precipitation kinetics of some metastable phases is far from understood. In the present study various transformation pathways of the third phase were observed in situ by means of high-energy X-ray diffraction using synchrotron radiation. A Ti-45Al-10Nb (at.%) specimen was subjected to a temperature ramp of repeated heating cycles (700 °C - 1100 °C) with subsequent quenching at different rates. Depending on the quenching rate reversible transformations of the B2-ordered β_o phase to different ω-related phases were observed. The results indicate that the complete transformation from β_o to hexagonal B8₂-ordered ω_o consists of two steps which are both diffusion controlled but proceed with different velocities.

Abstract: Intermetallic TiAl alloys with a significant volume fraction of the body-centered cubic β-phase at elevated temperatures have proven to exhibit good processing characteristics during hot-working. Being a strong β stabilizer, Mo has gained importance as an alloying element for so-called β/γ-TiAl alloys. Unfortunately, the effect of Mo on the appearing phases and their temperature dependence is not well known. In this work, two sections of the Ti-Al-Mo ternary phase diagram derived from experimental data are shown. These diagrams are compared with the results of in-situ high-temperature diffraction experiments using high-energy synchrotron radiation.

Abstract: GKSS is currently investing heavily into new beamlines at DESY in Hamburg, Germany. After the completed installation of the wiggler beamline HARWI II at DORIS III GKSS is now building two new undulator beamlines at the new PETRA III storage ring. The High Energy Materials Science Beamline (HEMS) will allow high resolution diffraction experiments using samples and sample environments with masses up to 1 t, 3DXRD measurements, and high-energy micro-tomography experiments. The Imaging Beamline (IBL) will provide a nano-tomography as well as a micro-tomography station for X-ray energies up to 50 keV. Examples of typical experiments in the field of residual stress analysis, micro-tomography, and high-energy small-angle X-ray scattering will be given.