Papers by Author: Li Zhang

Abstract: The effect of rare earth oxides (Y2O3 and Dy2O3) on the microstructure and electrical properties of the X7R-type ceramics for base metal internal electrode multilayer ceramic capacitor (BME-MLCC) was investigated. As the amount of Y increased, the dielectric constants and the dielectric losses increased, while the temperature coefficient of capacitors (TCC) curve rotated in counterclockwise direction. On the contrary, the dielectric constants decreased with Dy, and the TCC curve remained the same. The grain growth can be inhibited by the Dy2O3, concluded from XRD analysis. The different influences on dielectric properties between Y2O3 and Dy2O3 were discussed by defect chemistry. Y3+ acted as acceptor, performing B-site substitution, while Dy3+ showed the amphoteric behavior. By optimizing appropriate qualities of Y2O3 and Dy2O3, the most-compatible composition for BME X7R ceramics can be obtained.

Abstract: The response analysis of reinforced concrete (RC) structures subjected to strong earthquake motions require realistic conceptual models. The special models, such as Clough and Takeda, which describe the non-linear section characteristic of reinforced concrete beam and column. In the earthquake motions, the deforming is sensitive to the response of structures intensively. The traditional lumped plastic model inevitably induces inaccuracy. Hence, meshing the members or distributing stiffness along the whole member is employed to simulate the seismic response of the structures. In this paper, Takeda elastic-plastic beam element model has been developed, which is based on general FEM code ABAQUS in order to simulate the response of RC. The influence is discussed due to the different lengths of plastic zone and element sizes.