Papers by Author: Lin Bu

Abstract: Stability analysis of steep rock bedding slope with weak structure planes using strength reduction method was simulated in this paper. The post processing function can display the development condition of the plastic zone, which is the criterion for instability of the slope. Analysis with working conditions of natural circumstance, after excavation, and the slope reinforced by anchor shank after excavation were put forward. Failure modes and safety coefficients of the slope proved that weak plane is the main factor controlling slope failure. Simulation results shown that strength reduction method is appropriate in predict the shape and position of the potential failure surface of steep rock bedding slope.

Abstract: Based on the fluid-solid coupling theory, we study the stability of surrounding rock mass around underground oil storage in Huangdao, Shandong province, analyze the stress of the surrounding rock mass around three chambers and the displacement change of several key monitoring points after excavation and evaluate the stability of surrounding rock mass using COMSOL Multiphysics software. Research results show that the stress at both sides of the straight wall of cavern increases, especially obvious stress concentration forms at the corners of the cavern, and the surrounding rock mass moves towards the cavern after excavation. The stress and displacement of the surrounding rock mass will increase accordingly after setting the water curtains, but the change does not have a substantive impact on the stability of surrounding rock mass.

Abstract: The mechanical properties of granite experiencing high temperatures under uniaxial compression condition were simulated in this paper. Numerically simulated stress-strain curve, peak stress, peak strain and the tangent elastic modulus were compared with the corresponding physical tests. Simulated results agree well with physical tests results, it is shown that Abaqus is suitable for the analysis of the temperature effect on rock fracture.

Abstract: The principle of the structure of displacement function, the establishment of governing equations, level set method were briefly outlined in this paper. Numerical simulations on three dimensional single edge notched specimens with different crack length in tension were performed using Abaqus software based on extended finite element method (XFEM), the stress intensity factor at static crack front was analyzed and the simulated results were in good agreement with analytical solutions. Numerical simulations in the present paper indicated that the extended finite element method is very suitable to deal with nonlinear fracture problems.