Papers by Author: Ling Bo Mao

Abstract: Corroded behavior of 310S stainless steel by molten Al-Si eutectic alloy in high temperature thermal cycles of 495～620°C was investigated. SEM/EDX, XRD and metallographic technique were used for observing and analyzing the morphology, composition and internal microstructure of the corrosion specimens. Results showed: on the surface of 310S stainless steel, after corroded through 300 melting-solidification thermal cycles, a corrosion layer of about 3μm thick, composed mainly of Fe2Al5 phase and FeAl3 phase was formed. Besides, upon observation of internal microstructure of 310S stainless steel after corrosion, plenty intercrystalline precipitation was present, which resulted in relatively severe intercrystalline corrosion. This was considered the principal factor that compromised mechanical property of the specimen of 310S stainless steel.

Abstract: The influences of dispersant type, supersonic time and concentration on the dispersion property of the nano-aluminium powders in glycol water were systematically studied by using Sodium dodecyl sulfate (SDS)，cetyl trimethyl ammonium bromide (CTAB) and sodium hexa metah posphate（SHMP）as dispersants. During the first stage of the experiments, influences of dispersant type and ultrasonic time with these dispersants were evaluated. The next stage of the study was focused on SHMP concentration. The influence of SHMP concentration was assessed. The results show that with the increasing of ultrasonic time, the dispersion property of nano-aluminum powders first increases and then decreases, and SHMP is the best one. The excellent dispersing condition on the dispersion property of nano-aluminium is: 5g/L SHMP and 50 min ultrasonic vibration.