Papers by Author: Ming Feng Hao

Abstract: Melt electrospinning is a safer, more environmentally friendly and cheaper alternative to solution electrospinning in producing superfine fibers. In this paper, a novel melt electrospinning device was used, which has higher efficiency than conventional equipment. Polypropylene is widely used in many fields and it is difficult to find a suitable solvent for its solution electrospinning at room temperature, so it was chosen in this study. The influences of the electrospinning parameters such as temperature and voltage on the diameter of the spinning fibers have been studied. Temperatures higher than normal processing temperatures were used in present electrospinning system in order to reduce the viscosity of the polymer melt sufficiently. Good quality fibers with smooth surfaces and with diameters mostly smaller than 10 microns were spun successfully. It was found that there was an optimum point for the spinning voltage (70-80KV) and the temperature (230-260°C) to get fine fibers.

Abstract: In this paper, self-designed electrospinning equipment was used to make a series of electrospinning experiments with materials of polypropylene. The influences of the receiver area, the upper plate area, and the overlapping area between the receiver and the upper plate, on the melt spinning electric field, the spinning efficiency, and the fiber diameter, were investigated respectively. The results showed that when the other parameters were kept unchanged, with the increase of the receiver’s diameter, the electric field strength and spinning efficiency increased, and the fiber diameter increased at first and then decreased; the bigger the overlapping area between the receiver and the upper plate, the more stable the vertical spinning path.

Abstract: The typical roof tiles made from soil or clay will be limited because it destroyed the farmland. On the other hand, the old tire and waste plastic increase year and year, which bring a serious environmental problem. So the roof tiles made from old tire and waste plastic will help a lot to decrease above environmental pressure. To get a suitable formula of roof tiles made from waste rubber tire powder and waste plastic, the present article studied mechanical performance of a series of composites. Then a preferred formula was got through comparing the mechanical performance.