Papers by Author: Mirsadegh Seyedzavvar

Abstract: This paper details the correlation between the input parameters with the tool material on the machining response in comparison of two different combinations of toolworkpiece material, namely copper-H13 and graphite-H13. The considered machining input parameters included pulse current and pulse on-time, and the investigated characteristics of the machining response were the material removal rate, tool wear, and surface roughness of the workpiece. Furthermore, differences in pulse shapes and process stability between the copper-H13 and graphite-H13 combinations were investigated.

Abstract: This paper presents the results of experimental studies carried out to conduct a comprehensive investigation on the influence of tool material on the characteristics of Electrical Discharge Machining process of AISI H13 tool steel. The studied process characteristics included the tool wear ration and thickness of the white layer on the workpiece after the EDM process. The experiments carried out under the designed full factorial procedure and the considered EDM input parameters included pulse on-time and pulse current. The results of this study could be utilized to choice a set of pulse on-time and pulse current according to the outcomes that suit the requirements of tool-workpiece combination processed by the EDM.