Papers by Author: Mohammad Nazzal

Abstract: Optimum variable strain rate forming paths based on two multiscale deformation-based stability criteria are developed. The first criterion is based on Hart’s linear stability analysis while in the second criterion; we introduce a modified one dimensional nonlinear long wavelength analysis introduced by Hutchinson and Neale [7] based on the well known 2-D Marciniak-Kuczynski criterion. The stability criteria are calibrated for the AZ31 Mg alloy at 400 °C yielding two different variable strain rate forming paths. These paths show that the nonlinear wavelength analysis is more sensitive to strain rate sensitivity and results in larger attainable uniform strains than Hart’s approach especially at low strain rates. This result is demonstrated through finite element simulations of a deep rectangular box using pressure profiles derived from the two variable strain rate forming paths. The FE results clearly illustrate that Hart’s approach underestimates the amount of uniform deformation and therefore prolongs the forming time to prevent failure compared to the nonlinear analysis.

Abstract: It is established that some superplastic materials undergo significant cavitation during deformation. Cavitation not only limits the superplastic ductility of the material, but also reduces the service properties and the fatigue performance of the formed parts. Experimental results have shown that an effective method to eliminate cavitation is the application of hydrostatic pressure during deformation. In this work, finite element simulations are carried out to study the effects of hydrostatic pressure on damage evolution during SPF. The analysis is conducted for the superplastic copper based alloy Coronze-638 at 550 °C. The results clearly demonstrate the effectiveness of the superimposition of hydrostatic pressure in reducing the amount of cavities generated during SPF and improving the integrity of the formed part.