Papers by Author: P. Guan

Abstract: Due to having the features of high accuracy, high stiffness, high load capacity and longer service life, the hybrid bearing spindle system is widely used in grinding. This paper presents an analysis method of hybrid bearing spindle dynamic characteristics. The method uses CFD method to solve the oil film pressure field, instead of Reynolds equation, in order to obtain the oil film stiffness and damping. With the obtained oil film stiffness and damping to build the appropriate constraints, 3D finite element model of the hybrid bearing spindle system is established, and the modal analysis of the spindle system is carried out. Compared the analysis results with the theoretical calculation results, the feasibility and correction of the method are proved.

Abstract: It is different from the traditional integrated super high-speed grinding wheel, the centrifugal force has greater impact on segmented grinding wheel in super high-speed rotation. In this paper, in order to ensure the safety of super high-speed grinding wheel, models for the connection between inner micro-unit’s displacement and stress of wheel matrix were established to optimize high-speed grinding wheel section form, reduce the centrifugal stress and control the radial displacement of grinding wheel. Consider the structural and mechanical characteristics of wheel matrix, strength check of the theoretical formula were also established. Taking into account the factors of aerodynamic and wheel connector effects, at last the design of segmented super high-speed grinding matrix was optimized with finite element method.