Papers by Author: Peng Fei Wang

Abstract: This paper analyzes and sums up the current research situation of downsizing land utilization of maps, and then put forward an improved method on the basis of ArcGIS. This method is fully combined with theories and practice of map downsizing and aims at improving the efficiency and quality when downsizing land utilization maps.

Abstract: In order to improve the flatness of cold rolled strips, the accurate knowledge of actuator performance in flatness control is required. As the basis of flatness control, efficiencies of flatness actuators provide a quantitative description to the law of flatness control. In this paper, a 1250 single stand 6-H reversible UCM cold mill was taken as the object of this study, with efficiency factors of individual actuators analyzed for better flatness control. For the purpose of obtaining accurate efficiency factors matrixes of actuators, a self-learning determination model of actuator efficiency factors was established in accordance with the practical rolling processes. The actuator efficiency factors can be determined and improved continuously by the self-learning model with correlative measurement flatness data input. With this study, performance of actuators in flatness control of UCM cold rolling mill has been obtained, which provides a theoretical basis for better flatness control.

Abstract: When there appeared catastrophic asymmetrical flatness defects in rolling processes, especially when the incoming strip is with a wedge shape, the tilting roll can hardly eliminate these defects completely. Moreover, the overshooting of tilting roll will lead to strip break. In order to improve the ability of cold rolling mill for asymmetrical flatness defects control, performance of the work roll asymmetrical bending as well as the intermediate roll asymmetrical bending has been analyzed, based on the actuator efficiency factors of them. In addition, for the purpose of obtaining accurate efficiency factors matrixes of actuators, a self-learning determination model of actuator efficiency factors was established in accordance with the practical rolling processes. In this paper, a 1250 single stand 6-H reversible UCM cold mill was taken as the object of this study, with efficiency factors of asymmetrical roll bending analyzed, which provides a theoretical basis for better flatness control. Analysis shows that the asymmetrical roll bending is significant for asymmetrical flatness control.

Abstract: . For UCM cold rolling mill, the intermediate roll shifting can enhance the ability of mill for better flatness control, but it will increase the non-uniform distribution of pressure between rolls, as result of a reduced roll life. In order to improve the contact state among rolls in rolling processes and to slow down the roll wear, the distribution of pressure between rolls under different forms of roll bending control has been calculated and analyzed by the influence function method in this paper. For the purpose of obtaining comprehensive information, not only the distributions of pressure between rolls with traditional work roll symmetrical bending and intermediate roll symmetrical bending have been analyzed, but also the distributions of pressure between rolls with non-symmetrical roll bending have been analyzed. All the analyses show that the work roll non-symmetrical bending as well as the intermediate roll non-symmetrical bending can play an important role in the slowing down of roll wear.

Abstract: The work roll bending is one of the most effective flatness actuators in flatness control of cold rolled strips, as a result of its characteristics such as high speed response, powerful effects on the elimination of flatness defects such as edge-waves, central waves and so on. The existing research on flatness control mainly focuses on the calculation of optimal adjustment of individual flatness actuator. However, the final output of a flatness actuator is required to be limited firstly for some special cases. If the incoming strip is coming with big symmetrical flatness defects, it happens that the position limit of work roll bending is prone to be reached or exceeded during the execution of the displacement, resulting in the residual symmetrical flatness defects without further elimination, as well as a limited flatness control process. In order to avoid this situation, substitution control by intermediate roll bending in case of work roll bending control over-limitation have been developed, which is based on actuator efficiencies and in accordance with the practical conditions. Applications show that the substitution control of intermediate roll bending for work roll bending over-limitation can play an important role in the residually symmetrical flatness control.

Abstract: In order to improve the flatness of cold rolled strips, strategies of closed loop feedback flatness control and rolling force feed forward control were established respectively, based on actuator efficiency factors. As the basis of flatness control system, efficiencies of flatness actuators provide a quantitative description to the law of flatness control. For the purpose of obtaining accurate efficiency factors matrixes of actuators, a self-learning model of actuator efficiency factors was established. The precision of actuator efficiency factors could be improved continuously by correlative measurement flatness data inputs. Meanwhile, the self-learning model of actuator efficiency factors permits the application of this flatness control for all possible types of actuators and every stand type. The developed flatness control system has been applied to a 1250mm single stand 6-H reversible UCM cold mill. Applications show that the flatness control system based on actuator efficiency factors is capable to obtain good flatness.