Papers by Author: R.A. Shenoi

Abstract: This paper presents an experimental investigation on the behaviour of structural adhesive bonding under quasi-static and moderately high loading rates. It addresses the effects of the loading rate on the strength of the adhesively bonded joints under dynamic tensile. A comparison has been achieved between the strength and the damage of specimens’ made of aluminium and lamina substrates. High rate tests showed ringing in the force/displacement curves.

Abstract: This paper outlines a new technique to address the paucity of data in determining fatigue life and performance based on reliability concepts. Two new randomized models are presented for estimating the safe life and pS-N curve, by using the standard procedure for statistical analysis and dealing with small sample numbers of incomplete data. The confidence level formulations for the safe and p-S-N curve are also given. The concepts are then applied for the determination of the safe life and p-S-N curve. Two sets of fatigue tests for the safe life and p-S-N curve are conducted to validate the presented method, demonstrating the practical use of the proposed technique.

Abstract: There are many instances where the use of weight saving composite materials for an entire structure is either; too complex, too expensive or unfeasible. In these circumstances the use of a hybrid structure can incorporate the benefits of traditional construction materials, for example steel, coupled with the advantages of composite materials in weight critical areas. In the present study, an investigation was undertaken into the fatigue life characterisation of a hybrid joint for marine application. In addition the residual strength of the joint, after a fixed number of fatigue cycles, was assessed under axial compression and bending loads. A progressive damage model was developed to predict the location of major stress concentrations, the path of damage and subsequent loss in stiffness of the joint under axial compression.