Papers by Author: Rodrigo Luri

Abstract: Aluminum foams are porous metallic materials which possess an outstanding combination of physical and mechanical properties such as: a high rigidity with a very low density. In this present research work, a study on the upsetting of an aluminum foam (with a density = 0.73 g/cm³) is carried out by employing different compression velocity values. From the results obtained, it is possible to determine the material flow stress for its subsequent use in finite element simulations (FEM). Once the material flow stress has been determined, it will be employed in order to analyze the conformability of several parts by FEM.

Abstract: ECAE process is a novel technology which allows us to obtain materials of sub-micrometric and/or nanometric grain size as a result of accumulating very high levels of plastic deformation in the presence of high hydrostatic pressure. This avoids the material being fractured and permits very high values of plastic deformation to be obtained (ε>>1). Therefore, these nanostructured materials can be used as starting materials for other manufacturing processes such as: extrusion, rolling and forging among others; with the advantage of providing nanostructure and hence improving the mechanical properties. In this present study, forging by finite element of materials that have been previously predeformed by ECAE is analysed. MSC.Marc^TM software will be employed with the aim of analysing the possibility of manufacturing mechanical components (spur gears) from materials nanostructured by ECAE.

Abstract: Recent studies have shown that Severe Plastic Deformation (SPD) processes improve the mechanical properties of the parts processed, through a reduction in the grain size. Equal Channel Angular Extrusion (ECAE) is one of the best -known SPD processes. A study was made of the force and the strain after two ECAE passages, as well as of the damage imparted to AA-6082, by means of experiments and Finite Element Simulations (FEM). The aim of this present research is to make a comparative study between experimental results and those obtained by FEM in order to verify the feasibility of these FEM simulations. In addition to this, it is intended to analyze the homogeneity obtained in the strain values after two ECAE passages made through route C.

Abstract: Recent studies have shown that severe plastic deformation processes (SPD) improve the mechanical properties of the processed parts. Some of the most outstanding SPD processes are as follows: High Pressure Torsion (HPT), Repetitive Corrugation and Straightening (RCS), Cyclic Extrusion Compression (CEC), Accumulative Roll Bonding (ARB), Conform and Continuous Combined Drawing and Rolling (CCDR), among others, but the most well-known is Equal Channel Angular Extrusion or Pressure (ECAE/ECAP). The aim of these processes is to introduce high values of deformation inside the parts in order to reduce the grain size and thus to improve the mechanical properties of the starting material. The study of the damage imparted to an AA-6082 alloy is made in the present work. This alloy is received as cast and it is quenched at a temperature of 530 °C during 4 hours in order to be processed by ECAE at room temperature using different geometries of the dies. The imparted damage is also studied by using FEM simulations.

Abstract: As is well-known, teaching of the computer-aided technologies is gaining more and more importance in the field of Manufacturing Processes Engineering. One such example is the growing tendency to employ computers in the simulation of material removal processes (CAM). In this study, a methodology proposed by the Manufacturing Processes Engineering Section in order to teach material removal processes is shown. This methodology is put into practice by employing one CAM software such as Surfcam® and is applied to the teaching subjects given by the previously-mentioned Section belonging to the Public University of Navarre. Due to the length of the practice manual developed for this purpose, which covers turning, milling and EDM processes, the present work has only been focused on the use of Surfcam® in the first case.

Abstract: Pure commercial Cu of 99,98 wt % purity was processed at room temperature by Equal- Channel Angular Pressing (ECAP) following route Bc. Heavy deformation was introduced in the samples after a considerable number of ECAP passes, namely 1, 4, 8, 12 and 16. A significant grain refinement was observed by transmission electron microscopy (TEM). Tensile and microhardness tests were also carried out on the deformed material in order to correlate microstructure and mechanical properties. Microhardness measurements displayed a quite homogeneous strain distribution. The most significative microstructural and mechanical changes were introduced in the first ECAP pass although a gradual increment in strength and a slight further grain refinement was noticed in the consecutive ECAP passes.

Abstract: In this work, the strain field attained by using a severe plastic deformation (SPD) process called equal channel angular extrusion (ECAE) is studied by the finite element method (FEM). The three-dimensional model with circular section includes shear friction between the part and the die, the material strain hardening behaviour and a rigid-deformable contact between the billet and the die. In the ECAE process the part is extruded through two channels with similar diameter that intersect at an angle. When the extrusion process has been performed, the processed material remains it cross section, so there is not any geometric limitation to achieve the desired plastic strain. There are different ways of processing the material by using the ECAE process; those ways of processing are called routes. In this work two passages of route C have been simulated. Using route C means that the billet has been rotated 180º between each passage. Deformations imparted to the processed material have been calculated and a comparison with experimental results has been carried out.