Papers by Author: Satoru Yoneyama

Abstract: This paper demonstrates instantaneous phase-stepping and subsequent phase analysis methods for interferometry and two-dimensional photoelasticity. The camera that has a pixelated form-birefringent micro-retarder array acquires phase-stepped fringes in a single camera frame. Then, the distributions of Stokes parameters that represent the state of polarization are calculated from a single image. In the case of the polarization interferometer, the phase difference of the two orthogonally polarized light beam can be easily determined from the Stokes parameters. On the other hand, the phase distributions of the isochromatics and the isoclinics are obtained in the case of the photoelasticity. It is emphasized that this method is applicable to real-time inspection of optical elements as well as the study of the mechanics of time-dependent materials because multiple exposures are unnecessary for sufficient data acquisition in the completion of data analysis.

Abstract: In order to clarify the effect of anisotropy on local deformation and the stress intensity factors in the vicinity of the crack tip under complicated stress states, biaxial loading tests were carried out on isotropic (Photoelastic sheet: PSM-1, Measurements Group, Inc) and anisotropic (LEXAN 9030, General Electric Company) polycarbonate materials. The biaxial dynamic loading device, which was developed by the authors, was fully utilized in the experiments. We carried out the experiments using isotropic and anisotropic specimens with a pre-processed 0°, 15°, 30°, 45°, 60°, 75° or 90° crack angle. We applied the equal biaxial stress, that is, the loads for both the Y- and X-axis as 0N : 0N-3920N : 3920N (1 : 1). We determined the stress intensity factors of specimens using both photoelasticity and caustics method. The results of the experiments were compared. As a result, when the materials with anisotropic property are used as machine or structural members, it is important to consider the extrusion direction of the material in their design.