Papers by Author: Shao Yu Zhang

Abstract: Cylindrical TiO₂ nanotubes and hexagonal TiO₂ nanotubes were obtained in the anodizing process of titanium in fluoride-containing electrolyte. Based on the experimental findings and viscous flow model, a mechanism of self-ordering process of hexagonal cells arrangement for porous anodic TiO₂ nanotubes (PATNT) is proposed in this paper. The analysis results show that oxygen evolution in the pore bottoms plays an important role in the self-ordering process. Oxide grows around the oxygen bubbles in the pore bottoms, which results in the formation of cylindrical TiO₂ nanotubes. Volume expansion of TiO₂ takes place during the anodizing process. Plastic deformation and repulsive force caused by volume expansion are responsible for self-ordering process of PATNT hexagonal cells.

Abstract: Attapulgite clay(ATP) from Xuyi county of China was purified by a wet method then treated with NaOH and 1.0 mol/L, 2.0 mol/L and 3.0 mol/L solutions of HCl. Transmission electron microscope(TEM) and X-ray diffraction (XRD) were used to characterize treated ATP. Results showed that wet purification could remove most of impurities. Treatment by alkaline and HCl of 1.0 mol/L and 2.0 mol/L could increase purity while treatment of 3.0 mol/L hydrochloric acid could dissolve some element of ATP so much as form SiO2 and destroy fiber structure to clips. Adsorption experiments of Fe3+ and Ni2+ from aqueous solutions were done using original ATP, purified ATP and treated ATP as absorbents. Results showed that Attapulgite could adsorb metal cations in significant amounts. Sodium hydroxide activation had little influence on adsorption capacity. Influences of acid treatments to ATP on adsorption capacity varied on different concentration solutions.