Papers by Author: Shao Yun Fu

Abstract: Spherical NiO nanocrystals were obtained by thermal decomposition of the precursor obtained via a hydrothermal method using urea as precipitant and polyethylene glycol (PEG) as surfactant. The structure, morphology and magnetic properties of the products were examined by XRD, TEM, ED, IR and VSM. The results of the structure and magnetic measurements on NiO nanocrystals were discussed. The results showed that the products were nanocrystalline NiO with a diameter of 21 and 50 nm, respectively, after calcined at 300 and 500 oC. The calcined NiO nanocrystals exhibited the characteristics of weak ferromagnetism by magnetic analysis at room temperature. At low external field, the hysteresis loops exhibit low coercivity, Hc=144.7 and 200.5 Oe, for the samples calcined at 300 and 500 oC, respectively.

Abstract: The calcium carbonate composite particles with nanostructured surface were prepared by heterogeneous nucleation. The calcium carbonate composite particles consisted of a core of groundcalcium carbonate particle and a shell of nanometer calcium carbonate particles. The thickness of theshell of composite calcium carbonate was observed by TEM. The bond intensity between the core and the shell was measured by means of ultrasonic comminution and stirred ball milling. It was found that the composite calcium carbonate had a compact structure. The linkage between the core and shell was so strong that it must be chemical bond instead of physical adsorption.

Abstract: Epoxy blend matrices were prepared by incorporating polyurethane-epoxy into diglycidyl ether of bisphenol-F (DGEBF) type epoxy while SiO2/epoxy nanocomposites were made using DGEBF type epoxy and tetraethylorthosilicate (TEOS) via a sol-gel process. The mechanical properties including tensile and impact properties at 77 K of the matrices and nanocomposites were studied. The mechanical properties at room temperature were also given for the purpose of comparison with the cryogenic mechanical properties. The results showed that the incorporation of polyurethane-epoxy with a proper content into DGEBF type epoxy enhanced the mechanical properties at both room and cryogenic temperatures. Addition of SiO2 nanoparticles to DGEBF type epoxy led to significant increase in tensile strength at cryogenic temperature (77 K) while no evident change in tensile strength at room temperature. In addition, a slight enhancement by the addition of 2 wt % silica while a slight reduction by the addition of 4 wt % silica were observed in impact energy.