Papers by Author: Shi Huan

Abstract: In the field of structural health monitoring, digital image measurement as a new monitoring technology is gradually being widely used. Real-time measurement for the torsion, however, has been the difficulty in the high-rise structure monitoring. This paper first analyzes the factors that caused the structure’s torsion and introduced the principle, but also the working mode of this new image measurement system, then a measuring scheme for high-rise structure’s torsion has been proposed, which indicates that this measurement technique is an effective new method.

Abstract: A multi-degree-of-freedom (MDOF) vibration isolation system (VIS) model is established with finite element method. And the numerical simulation results of the model under axisymmetric load in a good fit to the simplified model results. The model dynamics behavior under any load also was calculated, and it makes a further analysis for the vibration isolation effect of the model.

Abstract: The Lagrangian analysis method is re-analyzed. It is shown that when a series of stress profiles (or strain profiles, or particle velocity profiles) are measured to determine the strain-stress relation. In this paper, the stress histories at different Lagrange positions are measured by one dimensional SHPB experiments. The variation histories of various physical quantities are fitted to least square cubic B-spline function with a sufficient accuracy definite condition. The path lines of these quantities are constructed in terms of a least square quadratic polynomial. A program for inert flow of Lagrangian analysis (IFLA) is worked out. Taking the data of experiments as the input for the IFLA, the flow field information is solved. The error analysis shows that such a method has a definite reliability and stability.

Abstract: Shock initiation experiments on the explosives pressed TNT was performed to obtain in-situ pressure/radial displacement gauge data for the purpose of determining the Ignition and Growth reaction flow model with proper modeling parameters. The pressure and radial displacement were got by manganin-constantan composite 2-D Lagrange sensor. The particle velocity, relative volume, internal energy and fraction reacted of shock initiation process has been calculated by 2-D Lagrangian analysis method.