Papers by Author: Shi Qiang Gao

Abstract: As the high speed bearings, hybrid journal bearings are usually used in high and super high speed grinding machine spindle system. Since the bearing operates under high speed conditions, the excessive temperature rise of bearing is a key factor to lower the accuracy of the spindle system and limit the bearings working speed, so restrict the bearing applications. In this paper, the model of hybrid journal bearing is established to analyze the heat mechanism. In addition, the temperature field distribution for the certain hybrid journal bearing at high speed is studied by ANSYS considering the heat transfer characters between fluid and solid. The experiment of temperature for hybrid journal bearing system in super high speed grinding machine is also performed. The thermal properties and the measure for controlling temperature rise of such bearings are analyzed.

Abstract: Hybrid journal bearings are used in the high and super high speed cases mainly, such as the super-high speed spindle system. Since the bearing operates under high speed conditions, the excessive temperature rise of the bearing is a major reason to lower the accuracy of the main shaft system and limit the bearings working speed higher, as a result, restrict the bearing applications. In this paper, the thermal properties and the heat mechanism of such bearings are analyzed. The mathematical model of hybrid journal bearing is established to analyze the mechanism of generating heat. In addition, the temperature field distribution for the certain hybrid journal bearing at speed of 10000 rpm is studied by means of software ANSYS considering the heat transfer characters between fluid and solid. An improved measure about temperature rise of hybrid journal bearing is presented.

Abstract: The hybrid journal bearing with the high rigidity and rotation accuracy has been used in super-high speed grinding machine in some cases. But the main shortcoming of hybrid journal bearing is the higher temperature rise in the oil film when bearing works, which can lower the bearing capacity and cause the bearing failure due to the drop of oil viscosity and the larger thermal deformation. Fluent is a special CFD soft to simulate and analyze the flow and the heat exchange of liquid in the complex geometrical field. In this paper, the simulations of the temperature field of the oil film in the super-high speed hybrid journal bearing were performed by Fluent based on the mathematical models. The simulation results can not only forecast the flow state and the thermal properties of the bearing oil, but also find the design limitation of the bearing for the more improvement of the bearing design.

Abstract: The plastic deformation as a main form of failure of Interference Joints may happen in engineering works if it is designed unreasonably. In this paper, the contact stress and the strength of Interference Joint parts were analyzed deeply. Based on the theory of the reliability design, the general formulas and the method of the reliability design and computation for Interference Joint were established in consideration of joint structure, machining precision, interference value, mechanical properties of the joint parts and their randomicity. The practical design method, which would promote the reliability of Interference Joint effectively, was proposed for larger size and some other important Interference Joints. Compared to the conventional design method, the working reliability of Interference Joints can be improved obviously by means of the reliability design method.